Level 2 Home Charging Station Installation: How to Have Your Own Level 2 Charger at Home
Creating an EV charging station in your own home can be more expensive than some people think. However, the benefits of having your own Level 2 charger installation far outweigh the cost, as it will allow you to charge your car quickly and conveniently every night. Here’s what you need to know about Level 2 EV charging station installation and where to get it done right!
Why You Need a Level 2 charger at home
If you have a home charger, you can charge your car when you’re not using it. This means that you don’t need to worry about running out of power and being stuck on the side of the road. You can also use a timer so that the car doesn’t get overcharged and damage its battery. Using an EV charger at home is also great for lowering your electricity bill.
There are a few types of charging stations, including level 1 and level 2 chargers. While level 1 charging is slow, it’s a great option if you only have one vehicle and use it infrequently. However, if you want more options or want to charge your car faster, then a level 2 charger is better for you. Both of these options are commonly installed by electric companies or businesses like Walgreens when they install charging stations in locations that allow their customers to charge their vehicles during downtime.
The Different Types of Level 2 Chargers
There are a few different types of level 2 home charging stations. The first is the 240 volt, 30 amp charger, which will charge your vehicle in about 8 hours. This type of charger is typically installed in garages or outside and requires a 240-volt circuit with a 30 amp breaker. The second type of charger is the 208 volt, 40 amp charger which will charge your vehicle in about 4 hours. This type of charger can be installed inside or out and only needs a standard 20 amp outlet. The third type of charger is the 120 volt charger that plugs into any regular household outlet. This one takes 12 hours to fully charge your vehicle, but it can be used on 110 volts if necessary for slower charging times.
The installation process
Before you install a Level 2 charger, make sure your home is wired for 240 volts. If you’re not sure, consult a qualified electrician. Once that’s done, all you need is a charging station and an electrician to install it.
Install your charging station outside or in an area that can be easily accessed by electricians if repairs are needed. You’ll also want to make sure there’s enough room on the ground so people can park their cars without blocking the space where the unit will be installed.
A qualified electrician will then connect the charger and provide a connection cable from the unit back into your home’s electricity panel (make sure it doesn’t have any other wires already running in it). They’ll also provide grounding protection for safety.
The benefits of having your own Level 2 charger at home
You might be thinking that you don’t need a level 2 charger installed in your home if you can find one on the street, but it’s not as easy as it sounds. Not only is it hard to find a public charging station, but the ones you can find are often out of service. If you have your own level 2 charger at home, then all you have to do is plug in when you’re ready for a charge and take off when it’s done. Plus, for most people who have a level 2 charger in their home, they never even use their gas powered vehicles because of how convenient it is.
